+45 8637 7133

Weekdays 8-16 (Friday 8-13)

Møllevej 2

8544 Mørke, Denmark

Contact us

sales@ex-as.com

Avoid heavy pulling and lifting

Many showers have a small rim, which nicely prevents water from coming out, but makes it difficult to get a person in a bath chair in and out. In many cases, this leaves the carer with 100-150kg or more to pull/lift over the edge, risking wear and tear and work-related injuries.

The shower floor is easily and elegantly raised to create a level transition without affecting existing floors and at the end of use, the mat is easily removed and sent to us for recycling via our Recycling Boxes. Whether the shower is square, triangular or round, our system installs quickly and easily, all that is needed is a jigsaw and a ruler.

The system is a very cheap alternative to large and expensive conversions of existing bathrooms, and after use, nothing needs to be repaired or changed before the bathroom is ready for use.

Hævning af bruseniche gulv til den eksiterende badeværelsegulv til lettere tilgængelighed til bad

Easy access to your shower with Shower KITs

The smart Shower KITs can be customized to your shower enclosure to fit 100%. All our solutions for the bathroom are made of 100% non-toxic polyethylene plastic. When you need to clean, simply lift the tiles, wash them and the floor, and put them back down. Easy, simple, and safe.

Here are a few examples of the most popular solutions: 

Low edge - 16-20mm height

Belægning af fliser til bruseniche
Play Video about Belægning af fliser til bruseniche

Our tile system is perfect for compensating height differences between shower and bathroom floor, and if the height is 16mm to 20mm, you can solve the problem with one Shower KIT 1.

In the video you can see how quick and easy it is to install our bathroom solution.

Edge lower/higher than 16-20mm

Bruseniche med flise og rampe tilpasning
Play Video about Bruseniche med flise og rampe tilpasning

If the edge is either lower or higher than 16 - 20mm, we recommend installing a ramp. If the edge is lower than 16 mm, you can make do with one layer of tiles and a row of ramps at the edge. If the edge is higher than 20mm, more than one layer of tiles is needed. For every 16mm, one Shower KIT 1 is needed and for the top layer, one Shower KIT 2 is needed.

In the video you can see how quick and easy it is to install our bathroom solution.

Open shower

Hjørnerampe til bruseniche
Play Video about Hjørnerampe til bruseniche

For an open shower, it is necessary to purchase one Shower KIT 3, which easily and elegantly solves the problem. 
If the edge is higher than 20mm, more than one layer of tiles must be used. For every 16mm, one Shower KIT 1 is needed and for the top layer, one Shower KIT 3 is needed.

In the video you can see how quick and easy it is to install our bathroom solution.

Contact

If your shower looks different from the examples above, we also have a solution for you.

Contact us on phone: +45 8637 7133 or fill in our contact form.

Showering solutions

Download