+45 8637 7133

Weekdays 8-16 (Friday 8-13)

Møllevej 2

8544 Mørke, Denmark

Contact us

sales@ex-as.com

Foreltsflooring for camping and market stalls

A good caravan awning creates an extra, cosy space when you're out enjoying the outdoors. However, it can be difficult to maintain a good base in your awning. The same goes for the underlay behind the counter at a market stall. The lovely Danish summer weather can be unpredictable and an uneven surface can also be uncomfortable to walk on in the long run. 

Blankets, mats and other temporary solutions rarely fix the whole problem. With a eco-friendly awning floor from Excellent Systems, you get an intelligent and workable solution that can be moved and adapted to all awnings and market tents. 

The floor modules are made of food-grade, non-toxic plastic called polyethylene. This ensures that the surface you are staying on does not release any unwanted substances or chemicals into yourself or the environment. The modules are easy to assemble and adapt, and require no special tools or knowledge.

Brug hammer til at slå Excellent Systems fliser sammen

Non-toxic solutions that do not pollute or affect the environment

 Whether you're on a fixed base or on tour, an Excellent Systems awning floor is an advantage to have with your tent. By choosing this environmentally friendly solution, you get:
 
  • A solution that can be easily assembled and disassembled without the need for special tools
  • The plastic tiles very light and easy to transport and do not take up much space when not in use
  • Easy to clean and resistant to all common detergents
  • The joints in the floor make it not tilt when you walk on it
  • Gives off no odours or unwanted chemicals
  • Designed and responsibly manufactured in Denmark from recyclable plastic.
 
All solutions from Excellent Systems are designed and produced at our own factory on Djursland in Denmark. Also the floor solutions for wet areas and pools. The elements for the floor are made of polyethylene plastic, which is easy to apply and adapt to the specific wet area you are looking for a solution for. The polyethylene is 100% non-toxic and does not emit any colour, odour or waste substances into the environment in which they are installed. You can therefore also safely walk on the floor with bare feet. 

You can read more about the material we worked with here, and see our overview of certifications and tests of the elements here.

Not sure which solution is right for your needs? You are welcome to contact us for a no-obligation chat about options.

 
Læg fliserne i længde og bredde og arbejde indad efter

How to - easy installation and customisation

When installing the floor, it's a good idea to start by levelling the subfloor as well as possible. To prevent grass and small animals from through the small holes in the tiles, you can place a tarpaulin under the floor.

  1. Start by laying the tiles along the caravan or the front of your stall, in full width, from left to right.
  2. Next, lay out the tiles in depth so that you have a rectangular plot of the floor's width and depth.
  3. Now you can fill up with tiles in the entire desired area
  4. It is possible that the tiles must becutted at the sides to fit your tent exactly. You can do this easily with a regular jigsaw.
  5. Finally, install the slanted wedges at the entrance to the awning.

NOTE! If the tiles need to be cut to fit the slant wedges with the entrance, this must be done on the tiles right inside the trolley/ back of the floor, otherwise there is nothing to fix the slant wedges to at the entrance.

Contact

Need help finding the right solution for your needs?
Contact us on tel: +45 8637 7133 or send us an email.