At Excellent Systems we have always strived to impact our environment as little as possible, through sustainable production and the use of non-toxic materials. Our focus on recycling resources and reducing waste permeates all of Excellent Systems’ work and values.
There are many benefits to sustainable production, and both resources and money to save. Over the years, we have managed to recycle almost everything from our daily production. We usually say that the only waste we have is what comes from the canteen. Back in 1992, we started using the cooling water from our production machines to heat our offices. In this way we save water, electricity and heat.
The circular economy does not only benefit our company. Our customers also save money by sending end-of-life products for recycling. In fact, we give a cash discount on the next order, based on the number of kilograms of recycled plastic we receive. We call this program Cradle to Cradle.
Commodities
All our products are made of non-toxic Polyethylene (PE), plastic granulate. It is the same material found on the inside of milk cartons and is approved for food use.
Production
All our products are designed by Director Ole Frederiksen. They are produced in our factory in Denmark, and shipped to customers all over the world. Danish design, Danish quality, Danish production.
Products
Through injection moulding, we can produce the many different elements for our ramp and tile systems. By producing them locally, we ensure that quality and safety are always top notch.
Montage
We carry out assembly work throughout Denmark, and are always ready for advice and guidance. For international customers, we have selected dealers worldwide who we train in the proper sale and installation of our products.
Profits from adjustment
During assembly, excess material often occurs after adjustment. We take this material back to the factory where it is recycled again to reduce waste of good resources.
Wash
Used parts and excess material from assembly are washed in our CO2 neutral washing machine to remove any dirt and grime. The machine uses rainwater and green power.
Crushing and regeneration
The clean plastic is then ground into plastic granules. It’s a simple process that makes it easy to recycle the plastic in our injection moulding machines. The granulation is carried out at the factory.
New products are ready!
The regenerated plastic granulate is now ready to be used in our production. The sustainable recycling process has ensured that the quality of the plastic is as good as new plastic. No waste, only good plastic!
Non-toxic PE plastic
All Excellent Systems products are made of non-toxic Polyethylene – PE. Some products are made of PEHD, which stands for High Density and is hard plastic. Others are of PELD, which is Low Density and a softer plastic
Strong products
PE products are strong and can carry weight up to 2000 kg. You can therefore use all kinds of wheelchairs and walking frames on the products, and even drive your car over them if the product is in your driveway, for example.
Slip resistant surface
Our ramp systems have anti-slip surfaces. If the product is to be used in wet areas or other challenging environments, we recommend the purchase of our SlipStop, which is extra slip-resistant.
Non-toxic in case of fire
PE plastic is environmentally friendly, according to DTU studies. They have shown that the plastic does not emit dangerous and toxic gases in case of fire, as many other ramps made of rubber, for example, do. Read more about these tests here.
Varying temperatures
All our products can handle temperatures from -50C up to +100C. You can therefore safely use our many solutions in the vast majority of weather and working situations, without fear of the product breaking.
Corrosive agents
PE products are acid-resistant and corrosion-free, and can withstand all kinds of common cleaning agents. The elements can be cleaned with e.g. a high-pressure cleaner or, if possible, in a normal dishwasher.
CE Labelled Products
All Excellent Systems’ own ramps are CE marked. This ensures you as a user of the ramp and you can be confident in the quality of us as a manufacturer. See our certificeringer here or contact us, if you have any questions about safety on the ramps
If there are people in the images, they must have given written consent for them to be used in marketing by Excellent Systems A/S and its distributors, and you must send us the consent form to ensure that the available images comply with relevant regulations
